分享 收藏

LIFA熒光壽命系統附件

品牌：荷蘭Lambert
型號/貨號： LIFA/LIFA
產地：歐洲荷蘭
供應商報價：面議

北京先鋒泰坦科技有限公司更新時間：2025-06-05 13:54:53

銷售范圍售全國

入駐年限第10年

營業執照已審核

同類產品像增強器(8件)

立即掃碼咨詢

聯系方式：13810146393

聯系我們時請說明在儀器網（m.oupniq.cn）上看到的!

掃碼分享

為您推薦

產品特點

LIFA是適用于熒光壽命顯微成像（FLIM）。該設備可以利用頻域技術在任何寬場顯微熒光成像系統獲得壽命變化相關圖像。系統包含TRiCAM?M可調制型像增強CCD相機，可調制光源，調制控制器，定制電腦以及LI-FLIM軟件。像增強相機包含像增強器，CCD相機，可以獲得*高增益和采集速率。

詳細介紹

LIFA熒光壽命系統附件
LIFA是適用于熒光壽命顯微成像（FLIM）。該設備可以利用頻域技術在任何寬場顯微熒光成像系統獲得壽命變化相關圖像。系統包含TRiCAM M可調制型像增強CCD相機，可調制光源，調制控制器，定制電腦以及LI-FLIM軟件。像增強相機包含像增強器，CCD相機，可以獲得*高增益和采集速率。
LIFA熒光壽命系統附件關鍵特點：
JZ的壽命成分：0-300ns的熒光壽命，精度可達30ps RMS
系統技術參數：

Lifetime range	0 - 300 ns
Lifetime resolution	less than 100 ps (single pixel)
Speed	2 lifetime images per second (full frame)
Spatial resolution	26 lp/mm (Gen II); 19 lp/mm (Gen III)
Sensitivity	single photon
Intrascene dynamic range	12 bit
Camera input format	1 inch
Effective pixel size	10.3 μm square (12,9 for lens coupled CCD)

控制器參數：控制器可以經USB線LI-FLIM軟件控制

Signal shape	Sinusoidal
Frequency range	1 MHz – 120 MHz
Frequency adjustment resolution	1 kHz
Frequency deviation	100 ppm max.
Harmonics suppression	Better than 25 dB
Output 1 Type a: MultiLED AC signal level DC current adjust	Capable of driving lightsource type a, optionally b and c Adjustable in 250 steps 0 – 1000 mA, 12 bit resolution
Optional lightsource outputs: Type b: Modulated laser diode AC signal level DC level adjust Type c: AOM for CW laser AC signal level Frequency Output 2 AC signal level AC signal after amplification	0.00 – 1.00 V peak-peak 0.00 – 1.00 V 0.00 – 1.00 V peak-peak Half the frequency of output 2 To image intensifier Adjustable from –50 to 0 dBm 15 Vpp nom.
External trigger input	LVTTL (phase shift on falling edge or rising edge)
Impedance	50 Ω
Phase adjustment range	0 - 360° in 1° steps
Phase deviation	< 0.01°
Cathode voltage DC	Adjustable from –150 V to +15 V
MCP voltage (gain) DC	Adjustable from 450 – 1000 V max.
Anode voltage DC	Fixed 6 kV

多LED光源

Peak wavelengths (nm), approximately	405 (CFP), 445 (cerulean, CFP), 470 (GFP), 535 (TRITC), 630 (CY5), others on request
Number of mounted LEDs	3 (standard), or 4 (maximum)
Modulation frequency	up to at least 80 MHz
LEDs switching time	200ms
Coupling	Compatible with existing Hg and Xe microscope adapters
Lifetime drift	less than 30 ps*
Optional Temperature stabilization for long-term (hours) lifetime stability	Active thermoelectric water cooling/heating system
Control temperature range	5 – 45o C
Temperature stability (constant load, constant ambient temp)	± 0.1o C
Dimensions (l x w x h)	346 x 109 x 183 mm
* Measured using stable fluorescent material with single lifetime component of 3.2 ns

多激光光源

Wavelengths (nm)	375 (BFP), 405 (CFP), 445 (cerulean, CFP), 488 (GFP), 515 (YFP, Venus), 647 (CY5), others on request
Number of laser lines	Standard: up to 3 or up to 6; Extreme: up to 4. All combined into one optical fiber output
Output power (mW)	20 mW-300 mW, depending on the wavelength
Modulation frequency	Up to 120 MHz (standard)
Input signal	Digital: 0...1 V / 50 Ω
Control interface	RS232
Coupling	KineFLEX system, with a single-mode polarization maintaining fiber and either FC-APC, FC-PC or FC-P8 output connector
Power stability	Standard: 2%, Extreme: 0.5%
Lifetime drift	Standard: less than 50 ps, Extreme: less than 20-30 ps
Dimensions (l x w x h)	19" rack housing. MultiLASER-3: 480 x 484 x 88 mm; MultiLASER-4 and 6: 610 x 484 x 132 mm
Options	? Multi-channel excitation ? Two single-mode optical fiber outputs ? Custom fiber outputs on special request
* Measured using stable fluorescent material with single lifetime component of 3.2 ns