分享 收藏

美國ConOptics 電光偏轉器/電光偏轉系統/EOD

品牌：美國ConOptics
型號： EOD
產地：美洲美國
供應商報價：面議

上海昊量光電設備有限公司更新時間：2025-08-04 08:34:22

銷售范圍售全國

入駐年限第10年

營業執照已審核

同類產品電光調制器/普克爾盒(24件)

立即掃碼咨詢

聯系方式：400-855-8699轉8191

聯系我們時請說明在儀器網（m.oupniq.cn）上看到的!

掃碼分享

為您推薦

詳細介紹

產品介紹：

電光偏轉器/電光偏轉系統/EOD

高精度gao效電光偏轉器!

Conoptics公司生產的電光偏轉器是效率高的光束角度改變器件。Conoptics的電光偏轉器可以在一定范圍內改變光線的偏轉角度，并高精度地控制光線的偏轉角度。Conoptics的電光偏轉器在電光材料上加上四極子電場來產生使得折射率隨著加的電壓而產生線性變化。為了消除普通偏轉器上的壓電效應，Conoptics的電光偏轉器選擇合適的，特殊的方向給晶體加上電場，以此消除晶體壓電效應。Conoptics的電光偏轉器器件內沒有可移動附件，長期使用下也不會有疲勞效應。

關鍵詞：電光偏轉器/電光偏轉系統/EOD/ Electro Optic Deflection Systems/ EOD/ Electro Optic Deflector， EO Deflector

List of Deflectors

Model 310A

Aperture (mm)	2.5mm
Deflection Efficiency	1.5 micro-radians/volt
Capacitance, pf	100
Standard Spectral Range	400nm-to-750nm
Length (mm)	118mm
UV / DUV options	Yes

Model 311A

Aperture (mm)	2.5mm
Deflection Efficiency	3.0 micro-radians/volt
Capacitance, pf	185
Standard Spectral Range	400nm-to-750nm
Length (mm)	219mm
UV / DUV options	Yes
Collinear Configuration	Center In/Center Out

Model 312

Aperture (mm)	2.7mm
Deflection Efficiency	0.6 micro-radians/volt
Capacitance, pf	50
Standard Spectral Range	400nm-to-1100
Length (mm)	71mm
UV / DUV options	Yes
Collinear Configuration	Center In/Center Out

Model 312-2

Aperture (mm)	2.7
Deflection Efficiency	1.2 micro-radians/volt
Capacitance, pf	100
Standard Spectral Range	400nm-to-110nm
Length (mm)	125mm
UV / DUV options	Yes
Collinear Configuration	Center In/Center Out

Model 412-2Axis

Aperture (mm)	2.0mm
Deflection Efficiency	4 micro-radians/volt
Capacitance, pf	40
Standard Spectral Range	700nm-to-1000nm or 1000nm-to-2000nm
Length (mm)	110mm
UV / DUV options	No
Collinear Configuration	Center In/Center Out

Amplifier Key Features:

Model 302RM Amplifier

Cabinet	Driver and power supply in single cabinet
Test Feature	Built-in test feature allows testing for max transmission of Pockel Cell without adjusting bias voltage
Input Impedance	Choice of amplifier input impedance by rear panel switch (50ohm/1K ohm)
DC Bias	Improved DC biasing of Pockel Cell provides greater linearity at higher bias voltages
Voltage Range	+/- 450VDC controlled by ten-turn front panel pot. Digital meter monitors differential bias applied to E.O. Modulator
Linearity	10bits referenced to full scale (.1%)
Bandwidth	DC to >200Khz with 90pf load and 3M (RG-62) cables
Max. Output Drive Level	750VP-P into 90pf load
Amplifier Input Signal	2VP-P max into 50/1K ohms delivers 750VP-P out
Input Signal Format	Options include Unipolar positive, negative or bipolar
Input Power (AC)	60W typical. Input power is both load (modulator) and frequency dependent.
Dimensions	19” Rack Mountable, 5.25”H(133mm) (3U) x 14”D (356mm)
Cooling	Forced air
Operating Environment	Designed for laboratory use (indoor only) Temperature range +5deg C to +50deg C ambient Humidity 20%-80% RH up to 32deg C Altitude <3000M
Weight	20lbs (9.07kg)

Model 412 Dual Amplifier

Cabinet	Driver and power supply in single cabinet
Input Impedance	Choice of amplifier input impedance by rear panel switch (50ohm/1K ohm)
Gain	375V/V Each Amplifier
Max. Output Drive Level	750V P-P, each amplifier, driving 60pf load, 3m RG-62 cables
Detected Rise/Fall Time	Typically 2.5us driving 60pf with 3m RG-62 coax
Input Signal Format	Options include Unipolar POS/NEG or bipolar set by rear-panel slide switch
Input Power (AC)	Typically 70W (load and frequency dependent)
Dimensions	19” Rack Mountable, 5.25”H(133mm) (3U) x 14”D (356mm)
Cooling	Forced air
Operating Environment	Designed for laboratory use (indoor only) Temperature range +5deg C to +50deg C ambient Humidity 20%-80% RH up to 32deg C, Altitude <3000M
Weight	20lbs (9.07kg)

Model 25D Amplifier

Cabinet	Driver and Power Supply in same cabinet
Input Impedance	50ohms
Gain	+/- 400vDC
Max. Output Drive Level	175V
Detected Rise/Fall Time	8ns
Input Signal Format	TTL or Analog
Input Power (AC)	300W
Dimensions	1125px W x 1100px L x 437.5px H
Cooling	Forced Air
Operating Environment	Designed for laboratory use (indoor only)
Weight	32lbs